Cyanoacrylate Adhesives

Delta cyanoacrylate are one part adhesive which cure in the presence of atmospheric moisture (humidity).  Before application of cyanoacrylate ensure surfaces are clean and dry.  Use D406 surface preparation cleaner. 

Note: some materials may be affected by solvent (particularly plastics) compatibility, tests should be carried out before use.  Apply cyanoacrylate to one surface only, press firmly together and allow adhesive to cure.  Selection of the appropriate grade of cyanoacrylate is important, dependant on materials being bonded and the bond gap.  Tests should be carried out to ensure product is suitable for particular application

!

Low Viscosity Cyanoacrylate Adhesive 20gm
CYNO40
!
cyno40
  • A fast curing low viscosity cyanoacrylate suitable for rubber, ceramics, plastics, metals, "O" rings and UPVC.
  • Colour : clear
  • Viscosity: Low
  • Gap FIll: 0.10mm
  • Shear: 30N/mm
  • Set Time: 2-30 secs
  • Equivalent: 406/495
  • 20gm

Medium Viscosity Cyanoacrylate Adhesive 20gm
CYNO110
!
  • A fast curing medium viscosity cyanoacrylate suitable for rubber, EPDM, SBR, PVC, metals and pottery.  A general purpose cyanoacrylate.
  • Colour: Clear
  • Viscosity: Medium
  • Gap FIll: 0.10mm
  • Shear: 30N/mm²
  • Set TIme: 2-45 secs
  • Equivalent: 401 / 496
  • 20gm

High Viscosity Cyanoacrylate Adhesive 20gm
CYNO1200
!
cyno1200
  • High viscosity cyanoacrylate use where vibration occurs, on uneven surfaces, metals, plastics, ferrite magnets, rubber and ceramics. High
    gap fill.
  • Colour: Clear
  • Viscosity: High
  • Gap FIll: 0.20mm
  • Shear: 30N/mm²
  • Set TIme: 5-60 secs
  • Equivalent: 415
  • 20gm

Tough Black Cyanoacrylate Adhesive 50gm
CYNO2000
!
cyno2000
  • Tough black cyanoacrylate use where high shock resistance and flexing is required.  Use on rubber, plastics, shoe repairs, metals, wire tacking, loud speakers and rubber to metal applications.
  • Colour: Black
  • Viscosity: High
  • Gap FIll: 0.30mm
  • Shear: 17N/mm²
  • Set TIme: 30-50 secs
  • Equivalent: 480
  • 50gm

Thixotropic Cyanoacrylate Adhesive 20gm
CYNO GEL
!
cyno gel
  • A thixotropic cyanoacrylate, will not sag or slump. Use on porous surfaces, vertical and overhead situations, fill large gaps, on metals, plastics, ceramics, upholstery repairs, leather, adhering signs and name plates.
  • Colour: Clear
  • Viscosity: Very High
  • Gap FIll: 0.50mm
  • Shear: 18N/mm²
  • Set TIme: 60-100 secs
  • Equivalent: 454
  • 20gm